Showing 106–140 of 560 resultsSorted by price: low to high
Red crocodile (alligator) test clip with a spring-loaded jaw, the standard colour for positive-side test connections.
5 mm 4-pin RGB LED that mixes red, green and blue to make almost any colour with Arduino PWM.
6-pin DIP IC socket that lets you mount and replace 6-pin chips on a PCB without desoldering.
M3 12 mm hollow copper standoff for spacing and securely mounting PCBs, modules and robot boards.
1000µF, 50V polarised electrolytic capacitor for heavy power-supply filtering and energy storage in 12-36V circuits.
M3 20 mm hollow brass hex standoff for spacing and securely mounting PCBs, modules and robot boards.
2.1 mm DC barrel power jack for adding a standard DC adapter input to boards, enclosures and devices.
Flexible 24AWG stranded hook-up wire sold per metre, for low-voltage circuit wiring, prototyping, robots and repairs.
Breakaway male header pin strips with standard 2.54 mm pitch, for soldering onto modules, PCBs and Arduino shields.
Compact ON/OFF rocker switch to add simple, reliable power control to your electronics, robotics and STEM projects.
9V battery snap connector (T-type) with red and black leads of about 15 cm for quick, reliable battery wiring.
40-pin female header strip with standard 2.54 mm spacing for connecting modules, shields and PCBs.
Right-angle PCB-mount DC barrel power jack with an internal switch, for adding a DC power input to your boards and devices.
Hermetically sealed reed switch that opens or closes when a magnet comes near, for door and window sensors and position detection.
L7805C linear voltage regulator that provides a stable 5V output from a higher DC input, in a TO-220 package.
BC327 general-purpose PNP transistor (TO-92), the complementary partner to the BC337.
Small transparent hot-melt glue stick for mini glue guns, crafts, electronics and quick repairs.
DC power jack adapters (male/female) with screw terminals, for quick power connections to LED strips, CCTV and projects.
L7812CV linear voltage regulator that provides a stable 12V output from a higher DC input, in a TO-220 package.
3-pin round ON/OFF rocker switch for power control in appliances, lamps and DIY electronics.
Slotted speed encoder disc that works with optical speed sensors to measure motor RPM and distance travelled in robot cars.
Small storage box to keep electronic components, screws and small parts organised in your kit or workshop.
Aluminium heat sink that draws heat away from chips and modules, improving performance and preventing overheating.
C&K ATS2D1G compact normally closed tamper switch that detects when an enclosure or cover is opened, for security devices.
680VAC metal oxide varistor (MOV) that clamps voltage surges to protect mains-powered circuits and equipment.
Flexible 22AWG stranded hook-up wire sold per metre, for low-voltage circuit wiring, prototyping, robots and repairs.
Large hot-melt glue stick for full-size glue guns, for crafts, mounting parts and quick repairs.
IRF540 N-channel power MOSFET (TO-220) for switching motors, LED strips and other high-current DC loads.
M3 30 mm hollow brass hex standoff for spacing and securely mounting PCBs, modules and robot boards.
Slim 27 mm piezoelectric ceramic disc that makes clear sound alerts and can also sense knocks and vibration.
9 x 15 cm perf board with a grid of pre-drilled holes for soldering components into permanent, reliable prototype circuits.
Gettop 9V (6F22) non-rechargeable battery for multimeters, alarms, remote controls and electronics projects.
If you love our products and service, consider leaving a tip to show your support. …
Show Your support: Tip Us for good serviceRead More
1 metre of 1 mm flux-core soldering wire (doped/local), an affordable choice for small repairs and electronics projects.
5kΩ single rotary potentiometer with 3 pins and a 15 mm shaft, for adjustable control in Arduino and electronics projects.
Your Cart is Empty