Showing all 22 resultsSorted by price: low to high
5 m WS2812B 5V addressable RGB LED strip with 300 individually controlled LEDs (60/m), IP67 rated.
Compact 650 nm, 5mW red laser dot module for alignment, laser tripwires and robotics projects. Never point at eyes.
7-segment LED display for showing numbers 0-9 in clocks, counters, timers and Arduino projects.
16-pin 8×8 red dot matrix LED display for showing letters, numbers, icons and simple animations.
Thin 4×4 membrane keypad with adhesive backing for password locks, menus and number entry with Arduino.
Board of 8 WS2812 addressable RGB LEDs, each individually controllable from one data pin for colourful lighting effects.
Green 8×8 dot matrix LED module driven by a MAX7219, chainable for scrolling text, signs and scoreboards.
Blue 8×8 dot matrix LED module driven by a MAX7219, chainable for scrolling text, signs and scoreboards.
16×2 character LCD with blue backlight and HD44780-compatible interface, for showing text, menus and sensor readings.
16×2 character LCD with green backlight and HD44780-compatible interface, for text, menus and sensor readings.
16×2 character LCD fitted with an I2C backpack, so it needs only two data pins on Arduino or ESP32.
0.96-inch 128×64 OLED display with I2C interface and yellow/blue pixels, crisp and low power for Arduino and ESP32.
20×4 character LCD with yellow-green backlight, showing 80 characters on 4 lines for detailed text output.
8×8 panel of 64 WS2812 5050 RGB LEDs, each individually addressable, for pixel art, animations and displays.
1 m WS2812B 5V addressable RGB LED strip with 60 individually controlled LEDs, IP67 rated, for custom lighting effects.
20×4 character LCD with I2C backpack showing 80 characters on 4 lines, using only two data pins.
Compact 1.8-inch colour TFT LCD module for text, graphics and sensor readings where space is tight.
128×64 yellow-green graphic LCD module with high contrast for text, menus and simple graphics in embedded projects.
2.4-inch full-colour SPI TFT display (no touch) for graphics, text and menus with Arduino, ESP32 and STM32.
3.5-inch colour TFT LCD screen (no touch) for graphics, dashboards and menus in embedded projects.
2.42-inch white monochrome OLED display with deep blacks and high contrast for text, icons and graphics.
7-inch HD HDMI display (1024×600) with resistive touch, ideal as a Raspberry Pi screen or compact HDMI monitor.
Your Cart is Empty