INNOVATE YOUR WORLD WITH BLUEPACK!!
Call To +254768809661 Email : bluepacknova@gmail.com
Category

    Cart

    Your Cart is Empty

    Back To Shop
    WS2812B 5V RGB LED Light Strip - Black PCB 1M IP67

    WS2812B 5V RGB LED Light Strip – Black PCB 1M IP67

    KSh 900.00

    Only 3 left in stock

    The WS2812B 5V RGB LED Light Strip with a Black PCB, 1-meter length, and IP67 rating is a popular and versatile addressable LED strip used in various lighting and decorative applications. Here’s a detailed description:

    Key Features:

    • WS2812B LEDs: This strip utilizes the WS2812B integrated LED. Each LED contains its own red, green, and blue light-emitting diodes, along with a built-in controller chip. This allows for individual control of the color and brightness of each LED along the strip.
    • Addressable: Each LED on the strip has a unique address. This means you can control each LED independently to create complex lighting patterns, animations, and effects.
    • 5V Operation: The strip operates on a 5V DC power supply, which is a common and convenient voltage for many microcontroller-based projects.
    • RGB Color: Each LED can produce a full spectrum of RGB colors (Red, Green, Blue) with 24-bit color resolution (8 bits per color), allowing for vibrant and nuanced color mixing.
    • Black PCB (Printed Circuit Board): The LEDs are mounted on a black flexible PCB. This can provide a sleek and less visually obtrusive look, especially when the strip is used against dark backgrounds. It can also aid in heat dissipation to some extent.
    • 1 Meter Length: The strip is 1 meter (approximately 3.28 feet) long, offering a manageable length for various projects. Multiple strips can often be connected in series to create longer runs, but careful power management is crucial.
    • IP67 Waterproof Rating: This is a significant feature indicating a high level of protection against dust and water ingress.
      • IP6: Dust-tight. No ingress of dust; complete protection against contact.
      • IP7: Protection against immersion in water with a depth of up to 1 meter for up to 30 minutes. This rating makes the strip suitable for outdoor or humid environments where water exposure is a possibility.
    • Cuttable: The strip typically has cut lines marked at regular intervals (usually every LED or every few LEDs). This allows you to easily shorten the strip to the desired length for your project. You’ll need to solder connections at the cut points to reuse the cut sections.
    • Easy Control: The WS2812B protocol uses a single data wire for communication, making it relatively easy to control with microcontrollers like Arduino, Raspberry Pi, ESP32, and dedicated LED controllers. Libraries are readily available for these platforms.
    • Chainable: Multiple WS2812B strips can be connected in series, as the data signal is passed from one LED to the next. However, remember that power consumption increases with the number of LEDs, so adequate power supply is essential.

    Technical Specifications (Typical):

    • LED Type: SMD 5050 RGB LED with integrated WS2811/WS2812B controller chip
    • Operating Voltage: DC 5V
    • Power Consumption: Typically around 60mA per LED at full brightness white (all three colors on). The total power consumption of a 1-meter strip with 60 LEDs can be around 3.6A at maximum brightness.
    • Number of LEDs: Varies depending on the density (e.g., 30 LEDs/meter, 60 LEDs/meter). You’ll need to check the product specifications.
    • Viewing Angle: Typically 120 degrees.
    • Operating Temperature: Usually -40°C to +80°C.

    Applications:

    • Outdoor Lighting: Garden decoration, patio lighting, architectural accents.
    • Automotive Lighting: Underglow, interior lighting.
    • Signage and Displays: Creating eye-catching signs and dynamic displays.
    • Wearable Electronics: Adding interactive lighting to clothing and accessories.
    • Gaming Setups: Ambient lighting to enhance the gaming experience.
    • Holiday Decorations: Creating custom light shows for various occasions.
    • DIY Electronics Projects: Countless creative applications due to its flexibility and individual LED control.

    Important Considerations:

    • Power Supply: Due to the potential for high current draw, especially when many LEDs are lit at full brightness, a stable and adequate 5V power supply is crucial. Calculate the required current based on the number of LEDs and their maximum current draw.
    • Data Signal Integrity: For longer strips, you might need to consider signal boosting or level shifting to ensure reliable data transmission.
    • Wiring: Proper wiring and soldering techniques are essential for reliable connections, especially in outdoor environments. Ensure waterproof connections are maintained after cutting and rejoining the strip.
    • Controller: You’ll need a microcontroller or a dedicated LED controller to send the control signals to the WS2812B LEDs.
    • Libraries and Code: Familiarity with programming and the available libraries for your chosen controller is necessary to create custom lighting effects.

    In summary, the WS2812B 5V RGB LED Light Strip with a Black PCB, 1-meter length, and IP67 rating is a robust, versatile, and visually appealing lighting solution that offers individual LED control and protection against dust and water, making it ideal for a wide range of indoor and outdoor projects.

    Category:

    Related products

      Cart

      Your Cart is Empty

      Back To Shop