4 Channel Bi-Directional Level Shifter Module

A 4 Channel Bi-Directional Level Shifter Module is an electronic circuit designed to translate voltage levels between two different logic families or systems. It allows signals to be transmitted between devices that operate at different voltage levels, such as 3.3V and 5V.

Description:

• Number of Channels: 4 independent channels for bidirectional level shifting.
• Bidirectional: Can shift levels in both directions (from high to low and low to high).
• Input Voltage Range: Typically accepts input voltages from 0V to 5V or 3.3V.
• Output Voltage Range: Provides output voltages corresponding to the input voltage levels.
• Isolation: Some modules may include isolation to prevent electrical interference or ground loops.
• Power Supply: Requires a power supply to operate, typically 3.3V or 5V.
• Mounting: Can be mounted on a breadboard, PCB, or other suitable surface.

Specifications:

The specific specifications of a 4 Channel Bi-Directional Level Shifter Module may vary depending on the manufacturer and the particular model. However, the following are common parameters:

• Input Voltage Range: 0V to 5V or 3.3V
• Output Voltage Range: 0V to 5V or 3.3V
• Propagation Delay: The time it takes for a signal to travel through the module.
• Current Consumption: The amount of current drawn by the module.
• Operating Temperature: The temperature range within which the module can operate reliably.
• Isolation Voltage: If applicable, the maximum voltage that can be isolated between the input and output sides.

Applications:

• Interfacing Devices: Connecting devices that operate at different voltage levels, such as microcontrollers, sensors, and actuators.
• Data Transmission: Transmitting data between devices with different voltage standards.
• Signal Conditioning: Conditioning signals to match the input requirements of a particular device.
• Noise Reduction: Isolating signals to reduce noise and interference.

Key Features:

• Bidirectional Operation: Allows for flexible level shifting in both directions.
• Multiple Channels: Provides four independent channels for simultaneous level shifting.
• Isolation (if applicable): Provides electrical isolation between input and output sides.
• Compact Size: Often available in small form factors for easy integration.
• Versatility: Can be used in a wide range of electronic applications.

By understanding the description and specifications of a 4 Channel Bi-Directional Level Shifter Module, you can select the appropriate module for your specific application based on your requirements for input/output voltage levels, number of channels, isolation, and other factors.